Safety Notes; Intended Use; Operating And Status Indicators - SICK GRSE18V Instrucciones De Operación

1

Safety notes

2

Intended use

3

Operating and status indicators

Table 1: Dimensional drawings
M18x1
2
3
5
1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 1: Short variant, con‐
necting cable
8021182.16B5 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and setting may only be performed by skilled per‐
son.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
The GRSE18(S)V is an opto-electronic through-beam photoelectric sensor (referred to
as "sensor" in the following) for the optical, non-contact detection of objects, animals,
and persons. A sender (WS) and a receiver (WE) are required for operation. If the prod‐
uct is used for any other purpose or modified in any way, any warranty claim against
SICK AG shall become void.
M18x1
2
3
5
1
M12x1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 2: Short variant, M12
male connector
M18x1
2
3
4
5
1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 3: Short variant, poten‐
tiometer, connecting cable
SAFETY NOTES
M18x1
2
3
4
5
1
M12x1
67
M18x1
2.2
(0.09)
2.8
(0.11)
Figure 4: Short variant, poten‐
tiometer, M12 male connector
1
5