Fein BLK1.3TE Instrucciones De Uso página 17

OBJ_BUCH-0000000077-001.book Page 17 Wednesday, July 18, 2012 8:10 AM
en
17
Replacing the punch (BLK1.6LE)
Fig.10
(figure 10).
Loosen the union nut and remove the com-
plete holder.
Pull out the extension (upward).
Replace the punch.
Apply a light coat of grease to the new punch
3.
before inserting it.
Slide the extension with the punch inserted
Punch
back into the holder.
Extension
4.
Turn the extension to align the punch.
Remount the holder to the machine with
Union nut
attention to the cutting direction.
6.
1.
Tighten the union nut.
5.
2.