Fein BLK1.3TE Instrucciones De Uso página 6

OBJ_BUCH-0000000077-001.book Page 6 Wednesday, July 18, 2012 8:10 AM
en
6
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure
power level measured at the
workplace L (re 20 μPa), in
pA
decibels
Measuring uncertainty K
pA
decibels
Measured A-weighted sound
power level L (re 1 pW), in
wA
decibels
Measuring uncertainty K
wA
decibels
C-weighted peak sound pressure
level measured at the workplace
L , in decibels
pCpeak
Measuring uncertainty
K , in decibels
pCpeak
Vibrations
Vibrational emission value (nib-
bling)
– m/s 2
2
– ft/s
Measuring uncertainty K, in
– m/s 2
– ft/s 2
REMARK: The sum of the measured emission value and respective measuring inaccuracy represents the
upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency
isdecreased.
Recommended dimensions of extension cord-
sat an operating voltage of 120 V – single-
phase a. c., with only one power tool
BLK1.3/BLK1.6/BLK2.0/BLK3.5/BLK5.0 con-
nected:
BLK1.3TE BLK1.3CSE BLK1.6E BLK1.6LE BLK2.0E BLK3.5 BLK5.0
82
, in
3
93
, in
3
93
3
9.5
31.1 22.2
1.5
4.9
82 82 82
3 3 3
93 93 93
3 3 3
93 93 93
3 3 3
6.8 8.8 8.8
28.8 28.8
1.5 1.5 1.5
4.9 4.9 4.9
Max. cable length, ft Max. cable length, m
≤ 100 100 200
–200 –300
Min. conductor size Min. conductorcross-
A.W.G. section, mm
16 14 12
80 85 85
3 3 3
91 96 96
3 3 3
91 100 100
3 3 3
7.3 8.9 10.0
23.9 29.1 32.7
1.5 1.5 1.5
4.9 4.9 4.9
≤ 30 30 60
– 60 –100
2
1.5 2.5 4