Fein BLK1.3TE Instrucciones De Uso página 18

OBJ_BUCH-0000000077-001.book Page 18 Wednesday, July 18, 2012 8:10 AM
en
18
Replacing the punch (BLK3.5)
Fig.11
(figure 11).
1.
Turn locking lever 90° counterclockwise.
90°
Turn the die counterclockwise by 45° and
pull it off.
Locking lever
Replace the punch by turning it 180° clock-
3.
wise and then pulling it out.
Apply a light coat of grease to the new punch 2.
before inserting it.
45°
Reinsert a punch and turn it counterclockwise
by 180°.
Remount the die and turn it counterclockwise
by 45°.
180°
4.
Turn the locking lever 90° clockwise.
5.
Die
6.
Punch
180°
8.
7.
90°
11.
9.
10.
45°