Hilti PR 30-HVSG A12 Manual De Instrucciones página 48

Trouble or fault
Shock warning.
Laser position warning.
Inclination warning.
Surveillance mode warning.
Height adjustment warning.
Low battery in the rotating
laser.
Low battery in the laser re-
ceiver.
Low battery in the tripod.
40 English
Possible cause
Shock warning has been triggered.
The laser is too steeply inclined,
leveling not possible.
The laser receiver is outside the
automatic inclination range.
The surveillance function is not
possible or is interrupted.
Automatic height adjustment is not
possible.
Low battery in the rotating laser.
Low battery in the laser receiver.
Low battery in the tripod.
Action to be taken
▶ Make sure the rotating laser is
standing securely and is not
exposed to vibration.
▶ Adjust the shock warning
sensitivity setting.
▶ Deactivate the shock warning
function. → page 33
▶ Bring the laser into an upright
position as far as possible.
▶ Switch the rotating laser on.
→ page 29
▶ Set the inclination of the laser
plane using the PRA 79 slope
adapter. → page 32
▶ Check the positions of the
rotating laser and laser receiver
and reposition if necessary.
▶ Remove obstacles from the
path of the laser beam (laser
plane).
▶ Then restart the surveillance
function.
▶ Use automatic alignment
with the surveillance func-
tion. → page 31
▶ The tripod is not paired. Pair the
tripod, rotating laser and laser
receiver.
▶ Switch on the tripod.
▶ Switch on the rotating laser.
▶ Charge the battery.
▶ Charge the battery.
▶ Charge the battery.
2179602
*2179602*