Product Overview; Pra 30G Laser Receiver And Control Panel - Hilti PR 30-HVSG A12 Manual De Instrucciones

charging contacts. Short-circuiting the contacts on a battery or charger may cause burning injuries or
start a fire.
▶ Do not charge or continue to use damaged batteries (e.g. batteries with cracks, broken parts, bent
or pushed-in and/or pulled-out contacts).
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for a certain
type of battery may present a risk of fire when used with other types of battery.
▶ Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶ The battery must be insulated or removed from the tool before the tool is shipped or sent by mail.
Leaking batteries may damage the tool.
▶ If the battery gets noticeably hot when not in use, this may indicate that the battery or the tool / battery
system is faulty. In this case, place the tool in a non-flammable location, well away from flammable
materials, where it can be kept under observation and allowed to cool down.
3 Description
3.1

Product overview

3.1.1 PR 30-HVSG A12 rotating laser
3.1.2 PR 30-HVSG A12 control panel
Inclined plane mode button and LED
@
Shock warning function button and LED
;
Speed of rotation button
=
LED for status "On/off" and "Auto-leveling"
%
3.1.3

PRA 30G laser receiver and control panel

Menu button
@
Decrease inclination, to the left. Move
;
PRA 90 down. Navigation in menu.
Automatic alignment / surveillance mode /
=
marking function
OK button
%
*2179602*
1
@
;
=
%
&
(
)
+
§
2
&
(
)
3
&
(
)
+
§
2179602
Laser beam (plane of rotation)
Rotary head
Sight
Grip
Battery release button
Li­ion battery
Battery state-of-charge display
Control panel
Base plate with 5/8" thread
On/off button
Surveillance mode LED (only with auto-
matic vertical alignment)
Battery charge status LED
Increase inclination, to the right. Move
PRA 90 up. Navigation in menu.
On/off button
Display
Marking notch
Detection window
English 25