Electrical Installation; Self-Learning Functions - SICK CM30-30BPC-KC1S01 Instrucciones De Operación

5

Electrical Installation

6

Self-learning Functions

8021279 | SICK
Subject to change without notice
2.)
3.)
4.)
The sensors must be connected in a voltage-free state (U
tion must be observed, depending on the connection type:
Only apply voltage/switch on the voltage supply (U
tions have been established. The green LED indicator lights up on the sensor.
DC: 10... 36 V DC, see „Technical data"
DC: 10 ... 36 V DC 1 III 50 V
1 Grenzwerte; Betrieb in kurzschlussgeschütztem Netz max. 8A
Rated voltage
2
A - Setting - Background, no object available
Pushbutton > press for 3 seconds until the LEDs flash once per second. The environ‐
ment is calibrated after the pushbutton has been released for 3 seconds.
ELECTRICAL INSTALLATION
> 0 V) once all electrical connec‐
V
2
= 0 V). The following informa‐
V
5
7