Set-Up - Agilent Technologies TwisTorr 305 FSQ Manual Del Usuario

Instructions for Use

Set-up

Do not remove the adhesive and protective cap until you are ready to install the
CAUTION
turbopump to the system.
Figure 26
Install this device indoors only, and do not use the pump in an environment
exposed to atmospheric agents (rain, ice, snow), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be complied with in
order to avoid condensation:
maximum ambient pressure: 2 bar above atmospheric pressure

temperature: from +5 °C to +35 °C

relative humidity: 0 – 90 % (non-condensing).

170 Agilent TwisTorr 305 FSQ & 305 SF User Manual