Stopping The Twistorr 305 Fsq & 305 Sf; Emergency Stop - Agilent Technologies TwisTorr 305 FSQ Manual Del Usuario

Instructions for Use
Stopping the TwisTorr 305 FSQ & 305 SF
To stop the pump while it is running, in is necessary to act on the control unit which
is driving the pump and which is connected to it.
It is possible to stop the pump via serial comm. commands as well as via Remote
I/O signals.
Please refer to the controller's relevant instruction manuals in order to find the
appropriate set of instructions (Remote: Chapter Technical Information - Controller
Connection & Window Meanings; On Board: Chapter Technical Information -
Interconnections & Window Meanings.

Emergency stop

Emergency stop can be achieved by removing the power supply.
This mode is to be used only in an emergency. The use of this stop mode
WARNING
could lead to faults and/or damages at the pump. Improper use of this
stop mode could void the warranty.
176 Agilent TwisTorr 305 FSQ & 305 SF User Manual