Introduction; Items Supplied; Safety Notes - Siemens SITRANS F Serie Guia De Inicio Rapido

Introduction

Intoduction
This Quick Start Guide is for the Siemens SITRANS FUS1010 IP65 (NEMA 7) Dual Channel
flow meters. It illustrates a typical setup using D-Series transducers in the Reflect mode (for
Direct Mode see flow meter manual). These procedures can also be applied to other single
and multi-channel models as well.
1.1

Items supplied

● SITRANS F Flowmeter
● SITRANS F literature CD
● Quick Start Guide
● For additional items refer to your packing slip.
1.2

Safety Notes

Quick Start Guide Safety Information for Hazardous Areas
Explosion Hazard. Will Cause Death, Serious Injury or Property Damage.
Restrict use and repair to qualified personnel.
Death or severe personal injury and/or equipment and property damage will result if proper
Hazardous (Classified) Locations installation precautions are not taken.
The use of unauthorized parts in the repair of the equipment, tampering by unqualified
personnel, or operation with the cover open in a Hazardous (Classified) Location will result
in dangerous conditions which will cause death, serious injury, and/or equipment and property
damage.
Follow all safety instructions contained or referenced herein.
FUS1010 IP65 NEMA 4X Quick Start
Operating Instructions, 12/2008, CQO:QSG002 Revision B
DANGER
DANGER
DANGER
1
5