Stryker SERFAS Manual Del Usuario página 12

Ocultar thumbs Ver también para SERFAS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 151
4.
Cut Activation Indicator: A yellow indicator will illuminate when RF
energy is delivered due to the CUT pedal/button being pressed
5.
Cut Set Point Display Window: Displays Cut power level setting and
error codes
6.
Cut Output Level Change: Increase or decrease the energy delivered
during the Cut mode
7.
Probe Indicator: Indicator will illuminate upon proper connection of
Probe to Generator
8.
Footswitch Indicator: Indicator will illuminate upon proper connection
of Footswitch to Generator
9.
Footswitch Connector: Connects to the SERFAS Energy Footswitch
10. Probe Connector: Connects to the SERFAS Energy Probes
Figure 1b: The SERFAS Energy Generator, rear panel
11. Sidne Port: Connects to the Sidne Console to enable voice operation
12. Hand Control Switch: Users who prefer not to use the hand control
feature may deactivate this functionality by switching the hand control
switch to the Off position
13. Firewire Connectors (Refer to iSwitch Operating and Maintenance
Manual P/N 1000-400-700 for instructions for operating the Wireless
Universal Footswitch with the SERFAS Energy Generator and the
appropriate manuals for other Firewire devices)
14. Speaker Volume Control
15. Fuse Panel
16. AC Power Inlet
17. Equipotential Ground Plug
EN-8
16
13
11 12 14
15
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido