Marklin Digital msd3 Manual De Instrucciones página 5

Update with the Central Station 3
- Requirement is a Central Station 3 with Software Version
1.4.1(0)(GFP 12.62) or newer.
- Place the locomotive with the decoder to be programmed
on the programming track.
- Call up the locomotive list. Turn on the configuration with
and „Edit Locomotives".
- Call up the configuration of the relevant locomotive
- Call up the page „Setup"
- Call up the decoder update with
will first be read. In the window that opens, the software
level for the decoders will be displayed in the 2nd column
(Info).
- After the field has been touched, the desired software for
the update can be selected in the 4th column (File).
- The update can be started with
has been clicked in the relevant selection fields (3rd
column, Upd).
- The menu can be left with
. Now, the decoder
after the checkmark
after the update.
Update with the Central Station 2
- Requirement is a Central Station 2 with Software Version
4.2.9(0)(GFP 3.81) or newer.
- Place the locomotive with the decoder to be programmed
on the programming track and call up with Control.
- Change to the locomotive's configuration with
- Change to the decoder update with
decoder will first be read.
- A window will appear in which the possible updates are
offered.
- The update for the decoder firmware (Decoder-FW) is
usually in the first line. The settings for the decoder
(Decoder FDS) can be selected in the second line.
Press on the button
window will appear with possible firmware updates.
- Usually, the most current update should be selected. To
do this, click on the relevant line and
confirm with .
- Start the update process with
After a successful update, leave the menu with
with .
. Now, the
in the first line (Decoder-FW). A
.
.
or
5