SYMPTOM
The bag is breaking on its
bottom part
The Bag is releasing
several folds at once.
The bag is not stretching
enough
The bag is twisted
PRACTICAL GUIDE
Here we present the most common symptoms
of operating failures, their probable causes and
precautions you should take. In case there are any
other enquiries, find one of our Authorized Dealers
or get in contact with our Post-Sale Department.
It is going to be our pleasure to help you with any
assistance you might need.
PROBABLE CAUSE
Small ruptures that happen
repeatedly on the bag's
bottom part. In general,
they occur due to low-
clearance between the
machine and the tray, and
then there is little space for
the bag to unfold.
Badly placed bag in the
machine or tray placed
very low (high clearance)
Low brake pressure
The tractor is not moving
in a straight line.
Uneven braking on the
wheels.
The tractor's drawbar is
not steady and results in
machine misalignment.
Instructions Manual
PROCEDURE
Increase the clearance by
lowering the tray and observe
until ruptures cease.
Observe if the folds are arranged
on the tray and if the tray does
not present high clearance. In
this case, it will be necessary to
cut the bag and start over.
Increase brake pressure. Do
not produce bags without
t h e n e c e s s a r y s t r e t c h i n g
r e c o m m e n d e d
manufacturer. High levels of air
inside the bag will compromise
the quality of the bagged product.
Always keep the tractor moving
in a straight line.
Check if the brakes on the two
wheels are operating evenly.
Check soil compaction.
Fix the tractor's drawbar.
b y
t h e
51