Identifying Parts And Controls - Sony SDM-P246W Manual Del Usuario

Identifying parts and controls

See the pages in parentheses for further details.
Front of the monitor
1
7 6 5 4
Rear of the monitor
8
Remove the back cover.
3 2
6
(GB)
A Sony logo (page 20)
Sony logo illuminates.
The illumination of this logo can be switched ON/OFF on the
menu.
B 1 (Power) switch (pages 9, 21)
This switch turns the monitor on when 1 (power) illuminates.
To turn the monitor off, press this switch again.
C MENU button (page 13)
This button turns the menu screen on and off.
You can also switch on the DDC/CI function by keeping this
button pressed for more than 8 seconds.
D m/M buttons (page 13)
These buttons are used to select the menu items and make
adjustments.
E OK button (pages 13, 16)
This button activates the selected menu item and adjustments
made using the m/M buttons (4).
When the menu screen is not displayed, with this button you
can make automatic adjustment of the picture quality for the
current input signal (One touch Auto adjust). (analog RGB
signal only).
F ECO button (page 13, 21)
This button is used to reduce the power consumption.
G INPUT button (page 12)
This button switches the video input signal among INPUT1,
INPUT2 and INPUT3 when multiple computers are
connected to the monitor.
H Back cover (page 8)
Remove this cover when you connect cables or cords.
I Security lock hole
The security lock hole should be used with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
J AC IN connector (page 9)
This connector connects the power cord (supplied).