Setup 5: Connect The Usb Mouse And Usb Keyboard; Selecting The Input Signal - Sony SDM-P246W Manual Del Usuario

Setup 5: Connect the USB mouse
and USB keyboard
By connecting the USB mouse or the USB keyboard or other
devices, you can switch inputs back and forth (KVM function).
For more details, see "KVM function" (page 22) .
1 Connect the supplied cable between the monitor
and the computer.
2 Connect the USB mouse or the USB keyboard or
other devices to the monitor.
For Macintosh user
If you connect the USB Downstream port to a Macintosh
keyboard with a power button, the power button on the
keyboard may fail to turn on. Turn on the power button on
your computer or connect the keyboard directly to your
computer and turn it on, and then connect the USB
Downstream port to the keyboard.
Notes
• The USB port of this monitor is compatible with Windows 2000 /
Windows XP Professional / Windows XP Home Edition / Macintosh.
• If the USB cable and keyboard have already been connected to your
computer, remove the USB cable and USB keyboard once.
• This setup is only designed for those computers and OS that are USB
compatible. For more details, refer to the operating instruction of your
computer or OS.
2
USB
2
keyboard
USB Mouse
1
To USB port to
Computer
USB cable (supplied)
12
(GB)

Selecting the input signal

Press the INPUT button.
The input signal changes each time you press this button.
On-screen message
(Appears about 5 seconds on
the upper left corner.)
INPUT1 : DVI-D
INPUT2 : DVI-D
INPUT3 : HD15
Input signal configuration
DVI-D input connector
(digital RGB) for INPUT1
DVI-D input connector
(digital RGB) for INPUT2
HD15 input connector
(analog RGB) for INPUT3