Operation; Charging The Battery; Battery Display; High-Pressure Operation - Kärcher K2 Follow Me Cordless Manual Del Usuario

Operation

Note
 Running the appliance dry for more than
2 minutes leads to damage of the high-
pressure pump.
 If the appliance does not build up pres-
sure within 2 minutes, switch off the ap-
pliance and proceed in accordance with
the instructions in chapter Troubleshoot-
ing.

Charging the battery

Note
If the motor or the battery is hot, please wait
for cooling down.
1. Turn the appliance off.
2. Connect the power cable to the power
supply.
3. Open the cover of the charging socket.
Illustration H
4. Plug the charging cable into the charg-
ing socket located on the appliance.
The table below describes the meaning of
LED indicators on the charger:
Color Status
Red Always
on
Blinking
Green Always
on
Blinking
24
Description
The power supply is
connected, but the
charging cable is not
connected.
 The charger / bat-
tery is damaged.
 The temperature of
battery is high.
The battery charging is
completed.
The battery charging is
in progress.

Battery display

The table below describes the meaning of
the residual capacity of the battery:
LEDs Color Residual capacity
3 Green 70 - 100 %
2
1
1 blinking
3 blinking Red
Note
 The battery display is deactivated during
the charging process.
 The battery display is correct only when
the appliance is used with the power
regulator in position "4".

High-pressure operation

Note
 Maintain a spraying distance of at least
30 cm when cleaning the painted surfac-
es.
 Do not use the dirt blaster to clean car
tyres, paint or sensitive surfaces (e.g.
wooden surface).
1. Turn the power regulator to the desired
position:
Illustration I
Position
Rated work
pressure [Mpa
(bar)]
Work flow rate
[l/min]
2. Press the appliance "ON / OFF" switch.
Illustration J
3. Unlock the lever on the trigger gun.
4. Switch on the appliance by pulling on the
lever of the trigger gun.
5. Switch off the appliance by releasing the
lever of the trigger gun. High pressure
remains in the appliance.
English
40 - 70 %
20 - 40 %
10 - 20 %
 0 %
 The appliance is
switched off.
1 2 3
2.0 2.5 3.5
(20) (25) (35)
2.8 3.25 3.75 4.0
4
4.0
(40)