Philips HeartStart MRx Manual Del Usuario página 4

Wireless Link

To send periodic clinical data from clinical mode during an event:
Confirm the HeartStart MRx is in a clinical mode and press the Menu Select button.
1
Using the Navigation buttons, select
2
Using the Navigation buttons, select the pre-configured Telemedicine destination for the data and
3
press the Menu Select button. Transmission begins.
When the Wireless Link Option sends periodic clinical data, the HeartStart MRx displays an icon
indicating connectivity status. See Figure 3.
Figure 3
Mark Event
ECG Unplugged

To send Event Summaries from Data Management Mode, post-event:
Confirm the HeartStart MRx is in Data Management Mode, Data Messenger is running on a
1
receiving computer and Wireless Link is connected. The HeartStart MRx automatically
communicates with Data Messenger (
when connected, brings up a menu to send a single event or all events. (Depending on your network
configuration, this connection may take some time to be established. An average connection time is
in the 30-75 second range.)
If you want to transfer a single event:
Use the [Prev Item] and [Next Item]
2
softkeys to select the desired Event Summary to
download.
Using the Navigation buttons select Send Selected and
3
press the Menu Select button. See Figure 4.
Transmission begins. Once the transmission is
4
complete a note appears on the screen. You need to
acknowledge it to continue.
NOTE: Sending all Event Summaries also erases each one from Data Management Mode. If you
4
Wireless Link PCDT Connectivity Icons
Symbol
No symbol
After a transmission has been initiated:
Wireless Link icon
want to keep other copies, copy the files to an external data card before transfer or send
them each individually

and press the Menu Select button.
Definition
A transmission has not been initiated.
A Periodic Clinical Data Transmission has been initiated.
A network connection may not be available. (White
symbol)
Wireless Link is currently transmitting PCDT data.
(Green symbol)
Wireless Link started a PCDT transmission but the
connection failed or a transmission was initiated before
the Wireless Link device was ready.

appears on the upper left part of the display) and
If you want to transfer all events:
Using the Navigation buttons select
2

button. See Figure 4.
3 Transmission begins. Once the
transmission is complete a note
appears on the screen. You need to
acknowledge it to continue.
and press the Menu Select