Cleaning And Maintenance - cecotec BREAD&CO 1000 DELICIOUS Manual De Instrucciones

ENGLISH

4. CLEANING AND MAINTENANCE

The device, as well as food rests, must be cleaned and removed regularly.
Unplug the cable from the power supply before starting the cleaning. Do not immerse the
product in water or any other fluid during cleaning.
Always allow the device to cool completely down before cleaning it or disassembling any of
its parts.
The lack of maintenance and cleaning of the product may cause a deterioration on its surface
and affect its lifespan.
Do not use strong detergents, powder abrasives or metal brushes to clean the device.
Do not allow the control panel to become wet.
Cleaning the kneading blade
If the kneading blade is difficult to remove from the appliance, add water to the bottom of the
bread container and allow to soak for up to 1 hour. Wipe the blade carefully with a cotton damp
cloth. Both the bread container and kneading blade are dishwasher safe components.
Cleaning the bread container
Remove the bread container by turning it in anticlockwise, then lift up the handle. Wipe inside
and outside the container with a damp cloth. Do not use any sharp or abrasive agents in order
to protect the non-stick coating. Dry the container completely before installing it again.
Note: The outside of the bread container and base may discolour. This is normal.
Cleaning the housing and lid
Use a damp cloth to wipe the lid, housing, baking chamber and interior of the viewing window.
Never immerse the housing into water for cleaning.
Note: It is suggested not to disassemble the lid for cleaning.
Storage
Before the bread maker is packed for storage, ensure that it has completely cooled down, is
clean and dry, and the lid is closed.
63
BREAD&CO 1000 DELICIOUS