Operating The Monitor; Front Panel Controls - Stryker VISION ELECT HDTV 240-030-960 Guia Del Usuario

Operating the Monitor

Front Panel Controls

Operate the monitor using the rotary control located on the front panel.
A list of the monitor controls and their functions is provided below.
Power LED
Power Switch
(Soft)
Figure 1: The VISION ELECT HDTV LCD Monitor front panel controls.
1. Power LED: Indicates menu current status. Displays green if
monitor is powered on; blinks red if monitor is in Standby mode.
2. Power Switch (Soft): Turns the power ON or OFF.
3. Rotary Control (Turn Right / Left): With the on-screen display
menu activated, increases/decreases the value of the selected
parameter. With the on-screen display deactivated, activates the
video source selection menu.
4. Rotary Control Switch (Push): Accesses/selects on-screen
display menu.
5. Rotary Control Switch (Push and Hold): Exits on-screen
display menu.
EN-10
Rotary
Control