Operating The Handpiece - Stryker Formula Manual Del Usuario

Operating the Handpiece

Before operating the handpiece, ensure the console and handpiece have
been set up properly. For handpiece setup instructions, see the "Setup and
Connection" section of this user guide. For console setup instructions, see the
TPS, CORE, or Crossfire™ console user guide.
Operation Summary
Operating the handpiece involves the following activities:
1. Selecting the appropriate blade settings on the console
2. Selecting cutting direction and speed
3. Controlling the handpiece with footswitch or handpiece
4. Controlling the suction with the suction-control lever
Selecting the Blade Settings
Blades are intended to move in different directions and speeds.
When modifying blade settings, observe the following guidelines:
• Arthroscopic cutter blades are most effective at resecting soft tissue in
oscillation mode.
• Arthroscopic burs are most effective in the forward mode.
Formula® Handpieces
The Formula® handpieces automatically selects the optimal blade settings
for any blade inserted into the handpiece. When a blade is inserted into the
handpiece, its name and optimal cutting speed appear on the console screen.
TPS Small Joint Shaver Handpiece
Set the handpiece speed and mode with the touch screen on the console or
footswitch.
EN-13