Prepare The Remote Transmitter - SportDOG SPORT TRAINER SD-1875E Manual De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 80
STEP :: 01

PREPARE THE REMOTE TRANSMITTER

CHARGE THE REMOTE TRANSMITTER
1. Lift the rubber cover protecting the Charging Jack.
2. Connect one of the charger connectors to the
Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 2 hours for the
first charge and every charge thereafter.
Using Lithium-Ion technology, the Remote
Transmitter only requires a 2 hour charge. It
is not harmful to let the unit charge for more
than 2 hours.
5. When charging is complete, replace the rubber cover.
Note: Approximate battery life between charges is 40 to
60 hours, depending on frequency of use.
TRANSMITTER INDICATOR LIGHT
OPERATIONAL MODE
Continuous stimulation, tone,
vibe, locate, or run Mode
Button pressed
Continuous stimulation, tone,
vibe, locate, or run Mode
Button pressed
Momentary stimulation
button pressed
Momentary stimulation
button pressed
Unit is charging
Unit is fully charged
(charger still connected)
8
LIGHT COLOUR
LIGHT FUNCTION
Green
Light is solid in colour while
button is pressed
Red
Light is solid in colour while
button is pressed
Green
Light flashes once and
turns off
Red
Light flashes once and
turns off
Red
Light is solid in colour while
charging
Green
Light is solid in colour once
the battery is completely
charged
WWW.sportdog.com
CHARGER CONNECTOR
PLACED IN THE
REMOTE TRANSMITTER
CHARGING JACK
BATTERy STATUS
Good
Low
Good
Low
Low
Good

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sport trainer 1600m

Tabla de contenido