Navigation In The Menu Level; Activate The Display Illumination; Automatic Deactivation Of Display Illumination / Switching To The "Now" Display Mode; Access The Menu Level - Fronius Symo 10.0-3 208-240 Manual De Instrucciones

Navigation in the Menu Level

Activate the dis-
1
play illumination
Automatic Deacti- If no key is pressed for 2 minutes, the display illumination turns off automatically and the
vation of Display inverter switches to the 'NOW' display mode (if the display illumination is set to AUTO).
Illumination /
Switching to the The inverter can automatically be switched to the 'NOW' display mode from any menu lev-
"NOW" Display el, unless the inverter was manually switched to standby mode.
Mode
The current power feed-in is displayed after automatically switching to the 'NOW' menu
item.
Access the menu
level
The menu items
-
-
-
-
-
28
Press any key.
The display illumination is activated.
The SETUP menu, under the 'Display settings - illumination' entry, offers a choice be-
tween a permanently lit or permanently dark display.
NOW
shows current data
LOG
shows data recorded from today, from the current calendar year and since the inverter
was started for the first time
GRAPH
daily characteristic curve graphically represents the course of the output power during
the day. The time axis is automatically scaled. Press the 'Back' key to close the display
SETUP
setup menu
INFO
information on the device and software
Press the 'Esc'
1
The display switches to the menu level.
Use the 'left' or 'right' key
2
desired menu item
Access the desired menu item by pressing
3
the 'Enter' key
key
to select the