37 8.4 Process And Test Protocol - Bosch TTM 2104 Manual Original

en | 54 | TTM 2104 / TTM 2204 | Software configuration
8.4 Process and test protocol
The process display lists the past 10 crossings. The test
protocol shows the results of a selected crossing.
1. Select <Process>.
2. Highlight a line and select <Protocol>.
No. Screen Description
element
1 Process Switch to process display
2 Record Switch to crossing protocol
"
Protocol of the selected crossing is displayed.
3. Set protocol view preferences.
R
Select right button to view the overall protocol
width.
R
Select left button to view the overall protocol height.
4. Select <Print> to print the protocol (requires access
to printer).
No. Screen Description
element
1 Protocol view Selecting overall page width or overall
page height view
2 Print Printing the displayed protocol
3 Protocol view Selecting overall page width or overall
page height view
|
1 691 206 005 2019-02-25
i
To print the result output: activate background print
in the browser's printer settings (see browser online
help).
8.5 Statistics
The statistical evaluation of the measured tread depth
is displayed as a diagram for the selected period of
time.
1. Select <Statistics>.
2. Enter password: ttm#admin
3. Select or enter period of time.
4. Select <Apply>.
5. Select <Download statistics data> if you want to
save the file.
i
The statistical data contain travels from both
directions independent of the "Direction of travel"
setting.
No. Screen element Description
1 Period Selecting the time period
2 Statistics Switch to statistical evaluation
3 Apply Saving changed settings
4 Downloading Saving the displayed statistical data
statistical data
Robert Bosch GmbH