Device - Bosch TTM 2104 Manual Original

8.2.4

Device

Enter and edit TTM 2104 / TTM 2204 information.
¶
Save changes with <Apply>.
No. Screen Description
element
1 Apply Saving changed settings
2 Master Entering the IP address of the "Master"
measuring unit
3 Subnet mask Entering the subnet mask
4 System date Selecting Adopt from browser option
and time
5 Time zone Selecting Adopt from browser option
6 Satellite Entering the IP address of the "Satellite"
measuring unit
7 ANPR IP Entering the measuring unit "ANPR"
address
8 Recording The ANPR camera has been installed in
direction such way that the registration number
forwards is recorded prior to measuring the tread
depth.
9 Recording The ANPR camera has been installed in
direction such way that the registration number is
backwards recorded after measuring the tread depth.
10 Displaying ANPR system transmits country ID the
the country display of which is switched on or off.
ID
Robert Bosch GmbH
Software configuration | TTM 2104 / TTM 2204 | 51 | en
8.2.5 Update
Update the software.
1. Set the maintenance mode on the Master.
2. Start update on Satellite.
3. Start update on Master.
4. Restart.
No. Screen
element
1 Browse
2 Start
Description
Selecting and loading a software update
file
Starting the update process
|
1 691 206 005 2019-02-25