Installation; Mounting With Flush Mounting Bracket; Removing The Display Unit - Pioneer AVD-W7900 El Manual Del Propietario

Connection and

installation

Installation
Important
! Check all connections and systems before
final installation.
! Do not use unauthorized parts. Use of un-
authorized parts may cause malfunctions.
! Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
! Do not install this unit where :
— it may interfere with operation of the vehi-
cle.
— it may cause injury to a passenger as a re-
sult of a sudden stop.
Mounting with flush mounting
bracket
1 Install securely the mounting bracket in
a safety location by using the supplied tap-
ping screws (M4 × 12).
2 Place the display unit into the mount-
ing bracket until it clicks.

Removing the display unit

% Insert the release plates to gaps be-
tween the display unit and the mounting
bracket.
The display unit will be released.
# Never apply with much force to the display
unit, the mounting bracket or the release plates
as this may damage it.
Autogood products «130»
Section
04
13
En