Section
03
Operating this unit
1
2
What's What
Display unit
1 SOURCE/POWER button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
Press and hold to turn the unit off.
2 c/d buttons
Press to change the settings when the
setup menu is displayed.
3 WIDE/MENU button
Press to select a desired mode for enlarging
a 4:3 picture to a 16:9 one.
Press and hold to display the setup menu.
4 DIMMER button
Press to switch between the dimmer levels.
5 IR transmitter
You can listen to stereo audio with sepa-
rately sold cordless headphones (e.g., SE-
IRM290).
8
En
3 4
5
Autogood products «130»
Basic Operations
Power ON/OFF
Turning the unit on
% Press SOURCE/POWER to turn the unit
on.
When you select a source, the unit is turned
on.
Turning the unit off
% Press SOURCE/POWER and hold until
the unit turns off.
Note
Take off your headphones when turning the dis-
play unit on or off. If you leave your headphones
on, a noise may be heard when the volume is
high.
Selecting a source
You can select a source you want to listen to.
! This unit is equipped with two video inputs,
VIDEO 1 INPUT and VIDEO 2 INPUT.
% Press SOURCE/POWER to select a
source.
Press SOURCE/POWER repeatedly to switch
between the following sources:
VCR1 (VCR1)—VCR2 (VCR2)
Changing the wide screen mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
% Press WIDE/MENU to select the desired
setting.
Press WIDE/MENU repeatedly to switch be-
tween the following settings:
FULL (full)—JUST (just)—CINEMA (cinema)—
ZOOM (zoom)—NORMAL (normal)