Hach SC4500 Instrucciones Para El Usuario página 13

After installation is complete, do the steps that follow:
1. Remove the cover from the USB box.
2. Supply power to the controller.
3. Make sure that the WiFi adapter is energized.
4. Wait a minimum of 5 minutes.
5. Examine the signal strength and network connection condition. Refer to the controller
documentation.
6. Install the cover on the USB box.
Section 5 Configuration
Refer to the controller documentation for instructions. Refer to the expanded user manual on the
manufacturer's website for more information.
Section 6 Maintenance
6.1 Replace the WiFi adapter
If necessary, replace the WiFi adapter. Refer to the illustrated steps is Figure 2.
Items to collect: WiFi adapter
Figure 2 Replace the WiFi adapter
English 13