Getting To Know The Machine; Description Of The Machine And Planned Use; Intended Use; Improper Use - Stiga ST 4851 AE Uso Y Mantenimiento

Ocultar thumbs Ver también para ST 4851 AE:
Tabla de contenido

Publicidad

• Avoid being a disturbance
to the neighbourhood.
• Adhere strictly to the local 
regulations governing the
disposal of packaging, oil, 
fuel, filters, damaged parts 
or any other element which 
may have an impact on the 
environment; this waste should 
not be disposed of along with 
standard household waste, 
but must be disposed of 
separately and sent to special 
waste disposal facilities for 
handling and recycling.
• When the machine is 
withdrawn from service, do not 
dump it in the environment, 
but take it to a waste disposal 
facility in accordance with the 
local regulations in force.
2.6 RECYCLING
         Do not throw electrical 
         equipment away with 
domestic waste. According to 
the European Directive 2012/19/
EC on electrical and electronic
equipment waste and its 
implementation in compliance 
with national standards, old 
electrical equipment must be 
collected separately, for eco-
compatible recycling. If electrical 
equipment is disposed of in 
a landfill or in the ground, the 
harmful substances can reach 
the aquifer and enter the food
chain, damaging your health 
and wellbeing. For further 
information on disposing of this 
product, contact the competent 
authority for the disposal of 
domestic waste or your dealer.
At the end of their working 
life, dispose of batteries
paying due attention to the 
environment. Batteries 
contain material classified as 
hazardous for you and the 
environment. They must be 
removed and disposed of 
separately at a facility that 
accepts lithium-ion batteries.
Separate waste collection 
of the products and
packaging used allows the 
materials to be recycled and 
reused. Reuse of recycled 
materials help to prevent 
environmental pollution and 
reduces the demand for raw 
materials.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a snow thrower.
The machine is electrically powered. It is 
equipped with a 48V / 80V rechargeable 
battery pack. It should be recharged with a 
230 V c.a. current socket using a specific 
battery charger (see the specific manual).
The electrical motor is activated by a starter lever 
on the handle, activating the clearing auger. The
operator can drive the machine by holding it by 
the handle where the starter lever is located, 
always standing upright behind the machine.

3.1.1 Intended use

This machine has been designed and built to 
remove and clear away snow from pavements, 
gardens, drives and other ground-level surfaces.
The snow thrower must only be 
used to remove snow.

3.1.2 Improper use

Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm 
persons and/or damage things. Examples of 
improper use may include, but are not limited to:
EN - 5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St 8051 aeSt 515 liSt 615 li

Tabla de contenido