Troubleshooting - GYS ARTIC 1500 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Maintenance:

• If the power cable is damaged, it must be replaced by the manufacturer,

its after sales service or an equally qualified person to prevent danger.

Regulations:

• Machine compliant with European directives.

• The certificate of compliance is available on our website.

• EAC Conformity marking (Eurasian Economic Community)

Waste management:

• This product should be disposed of at an appropriate recycling

facility. Do not throw away in a domestic bin.

GENERAL DESCRIPTION

The ARTIC 1500 charger is designed to charge small lead-acid batteries (sealed or not sealed), typically found in motorbikes, jet

ski, and other small leisure vehicles. The ARTIC can be used safely for : GEL (gel electrolyte), AGM (Absorbant Glass Mat), WET, MF

(Maintenance Free), CA (Calcium)...

This charger has been designed to charge 12V batteries (6*2V elements) from 1.6 Ah to 25 Ah, or for floating charge up to 100 Ah.

START UP

1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).

2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz). The indicator

3. During the charge, the device indicates the charge progress. When the indicator

the indicator

lights up, the battery is fully charged.

4. After the charge, disconnect the charger from the mains, then disconnect the charger's connections from the battery.

3 STEPS OF CHARGE:

Step

: Fast charge

Fast charge with maximum current to reach 80% charge level.

Step

: Absorption

Constant voltage charge to reach a 100% charge level.

Step

: Maintenance of charge

Maintenance of the battery voltage to the maximum.

Estimated charge time

Battery capacity

Charging time 20% >>> 80%