3
Sickle mower, small (with/without intake)
3.1
Hydraulic and electric connections
3.2
Operation
1 Return
2 Height adjustment
3 Tipping function
4 Leaked oil
5 Supply PTO (40 litres)
6 Coding connector, rear
7 Coding connector, front
1 Motor speed
2 Operating lever, mower
to the front (A) - Lower mower (first hold for 2 seconds
– float position and mower on)
to the rear (B) - Raise mower (float position and mower
off)
3 Suction blower on/off
4 Working hydraulics PTO on/off
5 Operating lever, tilting function
to the front (A) - Height adjustment MIN
to the rear (B) - Height adjustment MAX
to the left (C) - Lower/float position
to the right (D) - Raise
6 Speed adjustment / storage
7 Speed regulation on (mower)
Working with the attachment kit
Switch on the work hydraulics PTO.
Select the mower speed and save it.
Switch on the suction blower.
Only for work with the intake: Select maximum engine
speed (2500 rpm)
Use the control lever.
Start with the work.
2
-
EN
17