Kärcher MC 130 Manual Del Usuario página 27

13 2-broom sweeping system
13.1 Hydraulic and electric connections
13.2 Operation
1 Advance broom
2 Swivel broom to the left
3 Suction opening
4 Leaked oil
5 Swivel broom to the right
6 Return
7 Broom arm right up/down
8 Broom arm left up/down
9 Coding connector, rear
10 Coding connector, front
1 Operating lever, broom arm
to the front (A) - Float position
to the rear (B) - Raise broom arm (float position off)
2 Broom relief left/right together
3 Speed control at left/right together (sweeping brush)
4 Adjustment / storage for engine speed and broom
speed and broom relief
5 Working speed 1600/2200/2500 rpm
6 Raising/lowering the suction mouth
7 Working hydraulics PTO on/off
8 Circulation water on/off
9 Suction blower on/off
10 Fresh water on/off
11 Eco mode
Working with the attachment kit
Select ECO mode (switches the complete work pro-

gram on).
or
Switch on the work hydraulics PTO.

Select speed regulation (sweeping brush).

Select the engine speed.

Switch on water systems (fresh water system and recy-

cling system).
Switch on the suction blower.

Use the control lever.

Start with the work.

12
-
EN 27