Kärcher MC 130 Manual Del Usuario página 20

6 Snow clearer
6.1 Hydraulic and electric connections
6.2 Operation
20
1 Return
2 Turn the chimney
3 Leaked oil
4 Chimney up/down
5 Supply PTO (40 litres)
6 Coding connector, front
1 Motor speed
2 Operating lever, milling machine
to the front (A) - Lower milling machine – float position
to the rear (B) - Raise milling machine
3 Milling machine on/off (press for 5 seconds, first time)
4 Working hydraulics PTO on/off
5 Operating lever, chimney
to the front (A) - Ejection up
to the rear (B) - Ejection down
to the left (C) - Swivel chimney to the left
to the right (D) - Swivel chimney to the right
6 Speed adjustment / storage
Working with the attachment kit
Switch on the work hydraulics PTO.

Switch on the milling machine.

Select the engine speed.

Use the control lever.

Start with the work.

5
-
EN