Kärcher MC 130 Manual Del Usuario página 21

7 Single-blade snowplough
7.1 Hydraulic and electric connections
7.2 Operation
1 Side setting
2 Coding connector, front
1 Operating lever, snowplough
to the front (A) - Lower snowplough (float position on)
to the front again press and hold (A) - float position off,
plough pressed
to the rear (B) - Raise snowplough (float position off)
to the left (C) - Snowplough setting to the left
to the right (D) - Snowplough setting to the right
Working with the attachment kit
Use the control lever.

Start with the work.

6
-
EN 21