8
Wedge Vario snowplough
8.1
Hydraulic and electric connections
8.2
Operation
22
1 Side setting to the right
2 Side setting to the left
3 Coding connector, front
1 Operating lever, left blade + snowplough
to the front (A) - Lower snowplough (float position on)
to the front again press and hold (A) - float position off,
plough pressed
to the rear (B) - Raise snowplough (float position off)
to the left (C) - Setting left blade outwards
to the right (D) - Setting left blade inwards
2 Operating lever, right blade
to the left (C) - Setting right blade inwards
to the right (D) - Setting right blade outwards
Working with the attachment kit
Use the control lever.
Start with the work.
7
-
EN