11
Hot water weed killer
11.1 Hydraulic and electric connections
11.2 Operation
1 Swivel
2 Lateral displacement
3 Supply PTO (80 litres)
4 Coding connector, rear
5 Coding connector, front
1 Operating lever, floating beam
to the front (A) - Lower floating beam (float position)
to the rear (B) - Raise floating beam (float position off)
2 Control lever
to the front (A) - Lateral displacement
to the rear (B) - Lateral displacement
to the left (C) - Swivel
to the right (D) - Swivel
3 Water pump on
4 Work hydraulics PTO on (press for 5 seconds)
5 Water pump performance +/-
6 Settings / storage
7 Motor speed
Working with the attachment kit
Switch on the work hydraulics PTO.
Switch on the water pump.
Select the water pump performance and save it.
Select the engine speed.
Use the control lever.
Start with the work.
10
-
EN
25