Kärcher MC 130 Manual Del Usuario página 23

9 Floating beam with telescopic arm - double
9.1 Hydraulic and electric connections
9.2 Operation
1 Lowering / raising right arm
2 Swivel main arm
3 Lowering / raising left arm
4 Coding connector, rear
5 Coding connector, front
Water valve left: PIN C
Water valve right: PIN F
Earth: PIN G
1 Operating lever, floating beam + left arm
to the front (A) - Floating beam, set height
to the rear (B) - Floating beam, set height
to the left (C) - Left arm outwards
to the right (D) - Left arm inwards
2 Operating lever, floating beam/main arm + right arm
to the front (A) - Floating beam/main arm, swivel left
to the rear (B) - Floating beam/main arm, swivel right
to the left (C) - Right arm inwards
to the right (D) - Right arm outwards
3 Water pump performance +/-
4 Water, telescopic arm right
5 Water, telescopic arm left
6 Water pump on
7 Working hydraulics PTO on/off
8 Speed adjustment / storage
9 Motor speed
Working with the attachment kit
Switch on the work hydraulics PTO.

Switch on the water pump.

Select water connection.

Select the engine speed.

Select the water pump performance and save it.

Use the control lever.

Start with the work.

8
-
EN 23