Safety Information - Star TSP700 Serie Manual De Usuario

Safety Information

Important!
Make sure that the printer is turned off and unplugged from the AC outlet and that the computer is
turned off before making connections.
Important!
Do not connect a telephone line into the peripheral drive connector. Failure to observe this may result
in damage to the printer.
Also, for safety purposes, do not connect wiring to the external drive connector if there is a chance
it may carry peripheral voltage.
Connect the ground wire. (Europe only)
Take out the screw shown in the figure below, then fasten the ground wire terminal to the place where the
screw was removed and tighten the screw.
Europe only
– 3 –