Star TSP700 Serie Manual De Usuario página 8

Dip Switch Settings - Parallel Interface Type
(1) Star mode
Switch
1-1 Command emulation
1-2 Should not be changed (Should be set to on)
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Pin #31 (INIT) reset signal
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
(2) ESC/POS mode
Switch
1-1 Command emulation
1-2 Graphic adjustment
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Pin #31 (INIT) reset signal
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
Switch
2-1
2-2
2-3
2-4
The factory settings of DIP switch are all on.
ON
OFF
No.
DIP-Switch Bank 1
Switch 1-1
ON
OFF
Function
Function
DIP-SW 2
Function
Always ON
– 8 –
1 2 3 4 5 6 7 8
DIP-SW1
Command emulation
Star Mode
ESC/POS Mode
ON
Always ON
Invalid Valid
Valid Invalid
Offline or receive Receive buffer full
buffer full
Invalid Valid
ON
Always OFF
203 DPI 180 DPI
Invalid Valid
Valid Invalid
Offline or receive Receive buffer full
buffer full
Invalid Valid
ON
Should be set to on
ON
OFF
1 2 3 4
No.
DIP-SW2
OFF
OFF
OFF