Sanus VXF220 Instrucciones De Montaje página 10

3
Attach Arm to Wall Plate
3-1
Align the holes
3-2
Secure the arm
[03]
4 Attach your TV to the Arm
4-1 Position the arm
(T)
4-2 Attach the TV to the arm
[02]
[03]
(L)
10
[01]
[03]
[25]
(T)
Install the arm assembly [03] into the wall plate [01]. The pegs on
the top of the arm assembly fi t into the slots of the upper sliding car.
Be sure to align the bottom holes of the arm assembly with the holes
in the lower sliding car.
[01]
[03]
Secure the arm [03] to the wall plate [01] using hex key [26] and
screw [25].
Position arm [03] so one elbow is pressed against the wall. Tighten
the tension adjustment (T) to prevent the arms from moving while
installing the TV bracket.
Attach the TV bracket [02] to the arm assembly [03]. There is an
audible click when the parts are correctly assembled.
[01]
[26]
[25]
6901-002080 <03>
[03]