Safety Information For Lawn And Lawn Edge Trimmers - Parkside PGKGA 40-Li B2 Traducción Del Manual De Instrucciones Original

GB IE
• Comply with the
manufacturer's instruc-
tions for sharpening and
maintaining the saw
chain. Depth limiters placed
too low increase the potential
for kickbacks.
• Do not saw with the tip of
the blade bar (see Fig. b).
There is a risk of kickback.
• Ensure there are no ob-
jects on the ground which
could cause you to stum-
ble.
Safety information for
lawn and lawn edge
trimmers
Training
a) Read the instructions carefully. Fa-
miliarise yourself with the controls
and proper use.
b) Never allow people who are
not familiar with the instructions
or children to use the ma-
chine. Local regulations may
specify an age limit for the user.
c) Children, individuals with limi-
ted physical, sensory or mental
capabilities, as well as those who
have insuffi cient experience or
knowledge or are not familiar
with the instructions must never be
permitted to use the device. Lo-
cal regulations may specify an
age limit for the user.
d) Note that the user is responsible
for any accidents or risks to
others and their property.
Preparation
a) Before use, check the machine
for damaged, missing or incor-
54
rectly installed safety devices or
covers.
b) Never use the device if people
– especially children – or pets
are nearby.
Operation
a) Always wear eye protection,
long trousers and sturdy shoes
whenever using the machine.
b) Do not use the machine in poor
weather, especially if there is a
risk of lightning.
c) Use the machine only in
daylight or with good artifi cial
lighting.
d) Never use the machine if the
cover or guard is damaged, or
without a cover or guard.
e) Only switch on the motor when
your hands and feet are out of
the range of the cutting unit.
f) Always disconnect the machine
from the power supply (i.e. re-
move the removable battery)
1) whenever leaving the machi-
ne unattended,
2) before removing blockages,
3) before checking, cleaning or
modifying the machine,
4) after contact with a foreign
object,
5) if the machine begins to vi-
brate in an unusual way.
If the device starts to vibrate
abnormally strong, an imme-
diate inspection is required.
- search for signs of damage;
- have any necessary
repairs carried out on
damaged parts;
– make sure that all nuts,
bolts and screws are
properly tightened.