Primary Cartrid E Filter Cleanin Wit Automatic System; Emptying The Container; Emptying Of The Liquid Container - Nilfisk T75 Manual De Instrucciones

Ocultar thumbs Ver también para T75:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

T75
The filter shaker turns on automatically at the end of the
cycle for a preset time.
ait e ore restartin t e mac ine, to allow t e dust to settle.
eplace t e filter element i t e vacuum au e pointer stays in
t e red one even a ter t e filter as een s aken see Main
and a solute filter disassem ly and replacement .
If the indicator is still in the red area. The vacuum hose or
one o t e accessories may e clo
Clean these parts if this is the case.
Primary
cartridge
automatic system
1.
Filter cleaning solenoid valve 1
2.
Filter cleaning solenoid valve 2
3.
Filter cleaning solenoid valve 3
4.
Filter cleaning solenoid valve 4
5.
Cartridge container pressure switch
en it is necessary to vacuum very fine dust continuously
wit out stoppin to clean t e filters, t e Manu acturer provides
t e mac ine o a multi-cartrid e filterin system.
The unit is equipped with a fully automatic electropneumatic
device to alternately clean t e filterin
guarantees continuous service.
Electric panel, powered with a 24V rating, is complete with
cyclic timer to re ulate t e ollowin times
T1 Filter cleaning time
penin time o t e solenoid valve or ackwas ed air ex aust
into the cartridge.
The shorter the time, the more energetic the cleaning action
will be.
ork old time
T2
Time between one cartridge cleaning operation and the next.
T3 Time between cleaning cycles
I
Time between one cleaning cycle and the next.
GB
eck t e arrows on t e kno s o t e timer or t e exact
regulation.
The filter shaker turns on automatically at the end of the
E
cycle for a preset time.
eplace t e filter element i t e vacuum au e pointer stays in
E
t e red one even a ter t e filter as een s aken see Main
and a solute filter disassem ly and replacement .
C360
[ NOTE ]
[ NOTE ]
ed, and not t e filter.
filter
cleaning
Figure 7
cartrid es, w ic
[ NOTE ]
If the indicator is still in the red area. The vacuum hose or
one o t e accessories may e clo
Clean these parts if this is the case.

Emptying the container

Before proceeding with these operations, turn off the
machine and remove the plug from the power socket.
Check the machine filtration class.
e ore emptyin t e container it is advisa le to clean t e filter
see
leanin t e primary filter para rap .
with
Release the dust container with lever, then remove and
empty it.
Clean the machine as described in the "Maintenance,
cleanin and decontamination para rap .
as
t e container wit
substances have been vacuumed.
Make sure t e asket is in per ect condition and correctly
positioned.
Place t e container ack in position and secure it a ain.
After the cleaning session, leave the machine running for at
least 60 seconds before turning it off.
Avoid switching on/off too frequently.

Emptying of the liquid container

Before proceeding with these operations, turn off the
machine and remove the plug from the power socket.
Check the machine filtration class.
e ore emptyin t e container it is advisa le to clean t e filter
see
leanin t e primary filter para rap .
Release the container with the lever and remove it, then
remove the liquid stop device and empty it.
Clean the machine as described in the "Maintenance,
cleanin and decontamination para rap .
as
t e container wit
substances have been vacuumed.
Make sure t e asket is in per ect condition and correctly
positioned.
Place t e container ack in position and secure it a ain.
After the cleaning session, leave the machine running for at
least 60 seconds before turning it off.
Avoid switching on/off too frequently.
12
[ NOTE ]
ed, and not t e filter.
CAUTION!
Figure 8
clean water i a
[ NOTE ]
CAUTION!
Figure 8
clean water i a
[ NOTE ]
ressive
ressive

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido