Fan Belt - Graco LineLazer III 200HS Manual Del Usuario

Removal
FLUID INJECTION
1.
HAZARD; page 3.
2. Relieve pressure; page 8.
3. Fig. 5. Remove screw (269).
4. Rotate belt guard (223) up.
5. Lift engine (119) up to remove tension on belt
(101).
6. Remove belt from fan pulley (167) and drive pulley
(100).
Fig. 5

Fan Belt

ti3686a
223
ti3686a
167 101
Installation
1. Thread belt (101) around drive pulley (100) and fan
pulley (167).
2. Let engine (119) down to put tension on belt.
3. Rotate belt guard (223) down.
4. Install screw (269).
269
119
100
309896 19