Tabla de contenido
Publicidad
Removal
FLUID INJECTION
1.
HAZARD; page 3.
2. Relieve pressure; page 8.
3. Remove throttle cable from engine.
4. Loosen cap screw (69). Swing motor retainer
bracket (207) out.
5. Do Fan Belt, Removal; page 19.
6. Fig. 6. Disconnect red, green and black leads from
engine (119).
7. Remove engine and rocker plate (188) from spray-
er.
8. Remove four screws (65), washers (22) and nuts
(129) and remove rocker plate, dampeners (66)
and washers (136) from engine.
NOTE: All service to the engine must be
performed by an authorized HONDA dealer.
69
Fig. 6
20
309896
Engine
Red
66
207
ti3687a
Installation
1. Install rocker plate (188), dampeners (66) and
washers (136) on engine (119) with four screws
(65), washers (22) and nuts (129); torque to 125
in-lb (14.1 N·m).
2. Install engine and rocker plate (188) on sprayer.
3. Connect red, green and black leads.
4. Do Fan Belt, Installation; page 19.
5. Swing motor retainer bracket (207) in. Tighten cap
screw (69).
110
Black
164
Green
129
22
119
136
188
122
136
65
Publicidad
Tabla de contenido
