Delete messages
If you want to delete a single message, press C during playback.
Deletion of all messages simultaneously is only possible after playback:
Press and hold C until you hear a long beep.
Please note that new messages cannot be deleted until they have
been played.
Screening
Incoming messages will be heard from the machine's
loudspeaker as they are received. If there is no sound adjust the
+
volume with
/
You can also lift the receiver and speak directly to the caller. If the
recording is not interrupted automatically, press ! on the answer
machine, or press
Remote activation
The answer machine can be activated using the remote access
functions by calling your own home phone number and following
these instructions.
1.
Call your own number, after approximately 10 rings, the
machine will answer with a long tone.
2.
Enter the remote code, see below. If the code is correct you will
hear two short beeps.
3.
Press 9#. T�o bee�s confirms that the ans�er machine is no�
on. Replace the handset.
Remote access
This machine can be remotely accessed using the keys of an
ordinary tone dialling telephone. To use remote access, call the
answer machine by dialing home and enter the remote code
while the outgoing message is being played. If the code is correct
several remote access commands are available.
Remote Code
A three digit remote code is needed to access the remote access
functions of the answer machine. The remote code is printed
underneath the machine.
-
.
on the telephone you are using to answer.
*
English
10