Memory Handling And User Setting; Viewing Measurements Saved In Memory - Microlife BP 3AX1 Manual De Instrucciones

6.

Memory handling and user setting

6.1 Viewing Measurements Saved in Memory

The blood pressure monitor automatically stores each of the
last 30 measurement values. To view the stored measurements
for a user, press ▲ or ▼ in sleep mode. The last measurement
taken for the user is displayed.
The user, measurement sequence number, date, and time are
displayed on the top. Data obtained in Average Mode are
indicated by a MAM symbol in the upper right corner.
Press ▲ or ▼ to scroll through the list items. The first item in
the list is the average of all stored data.
Press OK and the display shows table of all data.
The first entry is the average. Data obtained in Average Mode
are indicated by an «A» symbol at the very right.
Press ▲ or ▼ to scroll through the list.
Press OK and the display shows graph of all data.The lines
indicate the systolic (top end) and Diastolic (bottom end)
values. Press ▲ or ▼ to move the cursor between
measurements. The currently selected measurement is
indicated by a blinking line. Press O/I to exit this mode.
Measurement
number
9
3/03
124
sys
73
dia
77
pul
3/03
No. sys dia pul
avg. 149 110 85
1 145 109 83
2 119
3 124
4 130
No.7 3/03
200
150
100
50
4/17 - 4/18 AVG MAM
MAM
15:48
mmHg
mmhg
/min.
15:48
71 74 A
73 79
80 77 A
15:48
SYS
145
DIA
85
PUL
98
13