Control Unit Programming And Functionality - Allmatic BOOMY4 Manual Del Usuario

9. CONTROL UNIT PROGRAMMING AND FUNCTIONALITY

9.1 DISPLAY
By pressing the "DOWN" button the following parameters can be read on the display.
DISPLAY
View status (--, OP, CL, ...)
Maneuvers performed, example:
02.0. (units) / 001 (thousands), equals 1020 cicles.
9.2 CONTROL UNIT STATUS
DISPLAY DESCRIPTION
--
Standby - closed automation or power ON after shutdown.
OP
Automation is opening up.
CL
Automation is closing up.
SO
Automation stopped by the user during opening movement.
SC
Automation stopped by the user during closing movement.
HA
Automation stopped by external event (photocells, stop input).
oP
Opened automation without automatic closing.
-tc
Opened automation with automatic closing; in the last 10 seconds the "-" is replaced by the countdown.
20 / 36 - English
DESCRIPTION
Description of the status of the plant. Refer to the table CONTROL
UNIT STATUS for the description of individual operating states.
Manoeuvre count: thousands (without dots) and units (with dots)
alternate.

6-1622396 - rev. 3 - 21/09/2021