Allmatic BOOMY4 Manual Del Usuario página 59

9.6 LEARNING WITH THE HIDDEN KEY OF AN ALREADY LEARNED TRANSMITTER
With stationary automation it is possible to press the hidden button of an already learned transmitter to open the radio memory of
the control unit. This is equivalent to pressing the «UP» button on the control unit.
Then follow the learning procedure from point 3 to 5 of the previous paragraph..
9.6 LEARNING WITH THE HIDDEN KEY OF AN ALREADY LEARNED TRANSMITTER
Make sure you are out of the programming menu.
1. To exit, briefly press the «MENU» button until you see the
status of the control panel.
Press and release the «UP» button. The sign rad appears
2.
on the display.
Within 10 seconds, simultaneously press button 1 and
3.
the hidden button of the transmitter to be deleted.
If the deletion is successful, the word CLr appears on
4.
the display.
After 2 seconds the display shows the location of the
5.
deleted memory.
WARNING! - After 10 seconds of inactivity the control panel exits the learning mode (the display shows tout).
6-1622396 - rev. 3 - 21/09/2021
UP DOWN
MENU
SS
UP DOWN
MENU
SS




English - 23 / 36