General Use; International Warranty - Bell & Ross BRS-92 Manual Del Usuario

BR S-92
BR-CAL.302
Movement : self-winding mechanical. Ref: BR-CAL.302. Power reserve: approximately 40 hours.
hours, minutes and seconds (all central hands). Fast date correction. Setting the time with seconds.

GENERAL USE

Winding . When the watch has stopped (crown in position 0): wind the mechanism by turning the crown
clockwise. After about 40 rotations, the watch is fully wound (the mechanism has no stop in order to keep
the winder from being wound too tightly). The operating time is then 40 hours. When the watch is being worn ,
winding takes place automatically.
. Quick setting * (crown in position 1): pull the crown into position 1 and set the date by turn-
Setting the date
ing the crown counter-clockwise. Slow setting (crown in position 2): in order to ensure that the date changes
at midnight instead of at noon, it is recommended to set the date using the hour hands. Pull the crown into
position 2 and turn the hands until the date is changed. Next set the time accurately.
. Pull out the crown to position 2. The second hand is then stopped, which enables an adjust-
Setting the time
ment with accuracy to within one second. Set the time by turning the crown in the desired direction.
IMPORTANT
* . As with all mechanical watches with a date function, quickset date setting (crown
Quickset date setting
in position 1) MUST NOT UNDER ANY CIRCUMSTANCES be carried out between the times of 9 P .M. (21:00)
and 3 A.M. (03:00).
Magnetic fields . Magnetic fields can adversely affect the accuracy of your watch. Also, we would recom-
mend that you avoid placing your watch near electronic devices that may generate large magnetic fields
(radio, smartphone, television, computer, tablet, loudspeakers etc.).
. Once the watch is set, to ensure perfect water resistance, push the crown back to posi-
Water resistance
tion 0. Never operate the crown underwater.
Note : the 4 slotted screws (D) mount the bezel to the case and ensure the water resistance of the watch. To
benefit from the Bell & Ross warranty, these screws must never be unscrewed.
Functions : MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and strap with fresh water.
It is also recommended to have the water resistance of your watch checked every two years.

INTERNATIONAL WARRANTY

To benefit from your 2-year international warranty, your card must be activated at the time of purchase by your
approved Bell & Ross point of sale, and presented every time an intervention is performed. You can now access
the digital version of this card and all the information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty
To ensure a service that meets the brand's exacting standards, any servicing of your watch must be carried out
by the Bell & Ross service centre or a watchmaker approved by Bell & Ross.
A. Minute hand
B. Hour hand
C. Second hand
D. Case attachment screws
E. Date
F. Crown
0. Hand wind the mechanism (clockwise)
1. Set the date (counter-clockwise)
2. Set the hour (either clockwise
or opposite direction)
A
(NEVER UNSCREW)
B
C
D (x4)
0 1 2
F
E