B.Braun Dialog+ SW 9 Serie Manual De Instrucciones página 31

Supplement New Labels on Machine
YOU WILL NEED ONE COPY PER MACHINE. PLEASE COPY IF NECESSARY.
US Supplement to Dialog
side of Dialog
Read the following information and instruct all users in your organization. Add this
supplement to your Instructions for Use.
This supplement only contains information that is changed. For the complete
descriptions, refer to the existing Dialog
As of now, additional labels will be placed on the rear side of Dialog
instructions for use. These new labels and descriptions are listed below:
Symbol Description
Follow instructions for use
Observe safety information
IEC 60601-1 Medical electrical equipment – Part 1: General requirements for basic safety
and essential performance; Reference number D.2-10
Warning; Corrosive material. Risk of chemical burns.
ISO 7010 Graphical symbols – Safety colours and safety signs – Registered safety signs;
Reference number W023
Warning; hot surface
ISO 7010 Graphical symbols – Safety colours and safety signs – Registered safety signs;
Reference number W017
Maximum machine weight of Dialog
without (right) all consumables (with all consumables = maximum working load)
Water inlet
Maximum rated pressure
Rated flow rate
Concentrate inlet
Maximum rated pressure
Rated flow rate
Supplement 38910465 / Rev. 3.00.20 / December 2018
+®
Instructions for Use: Information about the new labels on the rear
+
machines.
+
Instructions for Use.
+
machines which are not described in the
+
Single Pump including all options with (left) and
+
Dialog
29