General Description - AEB COL4 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL DESCRIPTION

Manual tester
Power supply voltage
7
8
9
1) Enabling switch +12 V Batt. (to ON +12 V present on PIN 13 of CON1).
2) Enabling switch +12 V Sc (to ON +12 V present on PIN 7 and 6 of CON1).
3) Enabling switch +12 V Gas (to ON +12 V present on PIN 14 of CON1).
4) Enabling switch RPM (to ON signal of motor RPM present on PIN 12 of CON1).
5) STEPPER MOTOR switch (control for checking the stepper motors connected to the STEPPER
MOTOR connector by means of a suitable cable. Possible functions: Open - Still - Close).
6) GREEN LED-SERVICE (displays the presence of a voltage of 12 V on PIN 3 of CON1).
7) LED OUT GAS (displays the presence of a voltage of 12 V on PIN 9 of CON1).
8) LED OUT BENZ (displays the presence of a voltage of 12 V on PIN 11 of CON1).
9) LED CPU/CICC. (displays the presence of a voltage of 12 V on PIN 4 of CON1 that can vary from
0,6 to 12 V. It can simply display the presence of a lambda signal by means of the primer output of a
switch or anyway all what is included in the voltage range).
10) T.P.S. knob (it makes it possible to continuously vary a direct voltage from 0÷5 V like a T.P.S.
signal which is present on PIN 8 of CON1).
11) LAMBDA knob (it makes it possible to continuously vary a direct voltage from 0÷1 V like a
OXYGEN SENSOR signal which is present on PIN 10 of CON1).
12) RPM knob (it makes it possible to continuously vary the frequency of a signal like the RPM from
300÷8000 RPM, signal which is present on PIN 12 of CON1).
13) INDICATORE (indicator) knob (it makes it possible to simulate the various levels of an AEB
standard sensor, signal which is present on PIN 2 of CON1).
14) INDICATORE (indicator) bushes for tester power supply CAUTION observe polarity.
15) MAIN CONNECTOR (CON1): connection for testing Switches - Emulators - Feedback.
16) STEPPER MOTOR: connection for testing Stepper Motors.
IsCOL4 Rev. 250902-0
COL4
Min. 10 V
Max. 16 V
1
10
11
15
Connectors for connecting
the tester wiring
14
2
3
12
16
6
4
5
13
25 - 64

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido